Sewing Bottle Caps to Flowers or Bow

Supplies:

Hammer

Small Nail

Neddle & Thread

Bottle Cap

Image and seal

Flower

Sharpie(not pictured)

With your sharpie mark 2 dots in the center this is where you will make holes.

With your hammer and nail tap very gently where you have marked the holes.

The holes should be big enough so that the needle will go through.

front view with holes in cap.

thread your needle knot at end....

pull thread through the holes.

Begin to sew your cap as if were a button to the flower clip.

 Sorry for the ugly images this was a very fast tutorail and the cap don't match the flower I just wanted to make a fast tutorail for those of you having probems with caps falling of hair products when mailed :) do to heat...

Interchangable Flip Flops...

Items needed:

Flip Flops

E-6000

3/8'' ribbon

scissors

lighter

clips

1. Cut 2 pieces of ribbon 3.7'' long fry your ends.

2. you will be needing your E-6000 glue .

 3. Place a small amount on at the tip of the ribbon.

4. Place ribbon on right back and hold for a couple of seconds.

5. Bring forward to the left side.

6. Bring the ribbon back and place a smal amount of glue at the back of strand.

7. Bring forward to right side.

8. Place remanding ribbon on the back where you began and place a small amount of E-6000 glue.

9. You are now done let it dry for at least an hour.